MaxBilt's Legend Series bed racks are giving a new meaning to the phrase “Choose your own adventure.” Workdays, weekend excursions, or weeklong expeditions, our rack can be customized to the task at hand. Giving you the freedom to take what you want and leave the rest. The choice is yours, don't let us tell you what to do.
Let's break it down…
Why the Tall Boy?- At 19 inches tall (10 more than the short rack) getting your gear elevated couldn't be easier. Whether it's for better airflow through your tent on those hot August nights, hauling your kayaks or canoes to the lake, or the bringing a 20 foot 2x6 back to the house, this rack will do it all. With more than double the side panel storage the bolt-on accessory choices are unlimited.
With 34-1/2 inches of space under the tall rack, you will have all the room to store your overlanding and camping gear.
The strong, sturdy upright bases have a commonly used bolt hole pattern to provideendless gear mount possibilities.
The rack crossbars are made of5052 corrosion-resistant aluminumto cut down on weight, yet strong enough to still haul tents, bikes, cargo baskets, coolers, or totes.
Weight ratingis 750lbs Static (not moving) and 450lbs Dynamic (cruising down the road or trail)
DON'T FORGET TO PICK YOUR SIDES
Upright only-(No Sides)allows you to set your rack crossbar span along the bedrail to whatever you choose.
3/4 Length-These panels enclose the sides, provide added mounting locations for gear, and still allow for 16 inches of unobstructed bedrail. This setup puts you at 29 inches center to center at the rack crossbars.
Full Length- From the back of the cab, clear to the tailgate, the full-length side panels allow for maximum mounting options. This setup puts you at 45 inches center to center at the rack crossbars.
PICKING YOUR SIDE MATERIAL
None - Needs to be selected if all you want Uprights only.
Aluminum side panels- They are aluminum, and they bolt to the sides… The Tall Boy rack comes with 2 panels per side that can all be used at once to close off the sides, or used 1 per side to leave some side access to the truck bed.
Steel Side panels- Like a Black Angus these panels have all the beef. If wanting to add heavy accessories to your side panels this is the choice for you. No need to worry if that heavy jack or those multiple fuel jugs are gonna bend these panels. They also offer easier access into the bed from the sides. Can be used in conjunction with the upper sections of aluminum side panels to have the best of both worlds.
Remember you are not stuck with this decision forever, you can purchase our length or height conversion at any time! Mix and match to your heart's content
*10 gauge steel (That's one gauge stronger than most competitors.)
*Powdercoated with an extremely UV resistant and durable gray hammer tone finish.
*Crossbars are made of 5052 Aluminum and come naked (they're corrosion resistant remember).
*Uprights bolt together using 7/16 carriage bolt hardware and Nylock nuts, because Nylock says you care.
*Works with or without Jeep OE cargo management system.
*Universal mounting options on the uprights and the side panels.
*Will work with MOST inside the rail mounted tonneau covers.
You know what they say, good things come in small packages... well this one comes in a really big package so that whadya think that means?