Lighting

Trail Tail LED Tail lights are the ultimate upgrade to the tail end of your Jeep. The slim profile takes care of the possibility of damaging stock tail lights on tight trails, as well as provides a clean look.

They are specifically designed to take trail abuse and have an extra tough circuit board with poly resin to keep them waterproof.

Trail Tails have 130 red, 18 white reverse lights, and 5 side super-bright LEDs to light up the night and keep your vehicle visible.

To replace 4 inch grommet style lights use our ADAPTER KIT

Details:

• Slim Profile
• Waterproof design
• White reverse lights included
• Super Bright LEDs
• Combination brake, turn, running, and reverse
• Side Marker lights
• Lifetime warranty
• *Comes as a pair
• Will fit any CJ, YJ, TJ, Scout (80,800) or any flat mounting surface
• Will fit most manufactured jeep armor.
• TNT Customs, Genright, Poison Spyder, DV8, JCR Offroad, MetalCloak, Warrior
• Note: LED may require different flasher depending on vehicle
• JKs will require resisters to eliminate fast flash and mounting adapters or corner armor.

07-17 wrangler owners, you too can run the best taillights in the biz!  This full kit includes everything you need to install our Trail Tail taillights, using a no-cut, no-drill adapter constructed of durable billet machined aluminum. Sleek, sexy, and ready to withstand the test of time, what more could you ask for?  No thanks needed, providing killer products for killer people is all the thanks we need.  

Kit includes:

• Running, reverse, brake, and turn indicators
• Badass Lifetime warranty
• Sold as a Kit
• 2 Billet aluminum adapters -In anodized black finish
• Pair of Max-Bilt Trail Tail tail lights
• 2 hyper-flash canceling resistors to wire in with your factory taillight pigtail

Whether you are looking to let those behind you know you are putting on the brakes or helping your fellow officer read your plate number, we got you covered.

Perfect for those who have relocated their license plate or if you simply want to add a little something-something to your tail end. The universal mounting means it will work with any vehicle, and it comes with plenty of wire for almost every application.

Another LED product that follows Max-Bilt's pursuit of high quality and durability. And of course, it comes with the no BS lifetime warranty!

Review local laws for location requirements of 3rd brake lights.

Details:

• Universal
• Sold as Each
• super bright

Made of 14GA steel.  Converts grommet style lighting to Trail Tail bolt pattern. Bendable tabs to locate in 3.5, 4, and 4.5 inch diameter holes. 1/4 20 space threaded holes.

**SOLD AS A PAIR**

Details:

• Fits all Jeep models from 1941-2018 with a tail light hole from 2 to 4 inch
• Convert grommet style lighting to Trail Tail bolt pattern
• 14 Gauge steel with two stage black powdercoated steel finish
• Bendable tabs to locate in 3.5, 4, and 4.5 Inch diameter holes
• 1/4 20 space threaded holes.

Recommended for installation of Trail Tail LED tail lights in a Jeep JK. These 50 watt 6 Ohm resistors will cancel the hyper flash of turn signals, when installing Max- Bilt Trail Tail L.E.D. tail lights. These can be used on most domestic and import vehicles.

Resistors simulate the load of a regular filament buld whether it be used in LED or HID applicaitons. This will solve LED related turn signal light or license plate light problems such as hyper flashing, no flashing or burnt our bulb indicaitons.

Details:

• 50 Watt
• 6 Ohm
• Sold as Pair

Eliminate hyper flash on your 2001-2006 TJ and LJ with this LED Flasher. Used when installing LED tail lights or turn signals. 

Details:

• 12 Volt
• Sold Each
• For use with 2001-2006 Wrangler TJ and TJ Unlimited

These LED lights are a great light to accent unlit gauges on your dash, replace your license plate bolts with these lights, even light up the interior of a storage box! Mounting is as easy as drilling a hole, placing the stud end of the light through the hole, and placing the nut on the back. Run your wires and you are finished! 

Details:
Sold as Pair

Part Number TTLP

                ***** CURRENTLY OUT OF STOCK, CUSTOM ORDER *****

Protects your stock tail lights from the hazards out on the trail. This cover offers you the perfect balance of good looks and strength. Full wrap around design helps prevent smashing the tail light. For Jeep TJ Wranglers.

Details:

• Sold As Pair
• Star Style
• CNC laser sliced, powder coated 18 gauge steel
• Made in the USA
• Maximum light output
• Large reverse light cutout allows high visibility when in reverse
• Brake light stencil cut-outs
• Jeep Wrangler TJ/LJ 97-06
• Keep those behind you in the know while making a statement

Always wear protection. CNC laser sliced, Powdercoated 12 gauge steel protects your stock tail lights from the hazards out on the trail.
CNC laser sliced, Powdercoated 12 gauge steel protects your stock tail lights from the hazards out on the trail. Made right here in the USA, we offer you the perfect balance of good looks and strength.

Full wraparound design helps resist the opportunity of the taillight being smashed. Large reverse light cutout allows for maximum light output when in reverse, and the brake light stencil cutouts let you keep those behind you in the know while making a statement. For 07-18 Jeep Wranglers. Part Number JKTLCTT

Protect your stock tail lights from all the hazards of the trail and offers you the perfect balance of good looks and strength.

Details:

• Sold as a Pair
• Trail Tail Lady Style
• CNC laser sliced
• Two-phase, black powder coated 12 gauge steel-protection
• Full wraparound design
• Helps minimize the risk of the tail light being smashed
• Large, reverse light cutout
• Allows for maximum light output when in reverse
• Brake light stencil cutouts
• Keep those behind you in the know while making a statement
• Easy installation
• Made right here in the USA
• For 07-18 Jeep Wrangler JK

Always wear protection. CNC laser sliced, Powdercoated 12 gauge steel protects your stock tail lights from the hazards out on the trail.
CNC laser sliced, Powdercoated 12 gauge steel protects your stock tail lights from the hazards out on the trail. Made right here in the USA, we offer you the perfect balance of good looks and strength.

Full wraparound design helps resist the opportunity of the taillight being smashed. Large reverse light cutout allows for maximum light output when in reverse, and the brake light stencil cutouts let you keep those behind you in the know while making a statement. For 07-18 Jeep Wranglers. Part Number JKTLCTT

Protect your stock tail lights from all the hazards of the trail and offers you the perfect balance of good looks and strength.

Details:

• Sold as a Pair
• Vintage Jeep Cutout Style
• CNC laser sliced
• Two-phase, black powder coated 12 gauge steel-protection
• Full wraparound design
• Helps minimize the risk of the tail light being smashed
• Large, reverse light cutout
• Allows for maximum light output when in reverse
• Brake light stencil cutouts
• Keep those behind you in the know while making a statement
• Easy installation
• Made right here in the USA
• For 07-18 Jeep Wrangler JK

Always wear protection. CNC laser sliced, Powdercoated 12 gauge steel protects your stock tail lights from the hazards out on the trail.
CNC laser sliced, Powdercoated 12 gauge steel protects your stock tail lights from the hazards out on the trail. Made right here in the USA, we offer you the perfect balance of good looks and strength.

Full wraparound design helps resist the opportunity of the taillight being smashed. Large reverse light cutout allows for maximum light output when in reverse, and the brake light stencil cutouts let you keep those behind you in the know while making a statement. For 07-18 Jeep Wranglers. Part Number JKTLCTT

Protect your stock tail lights from all the hazards of the trail and offers you the perfect balance of good looks and strength.

Details:

• Sold as a Pair
• Star Style
• CNC laser sliced
• Two-phase, black powder coated 12 gauge steel-protection
• Full wraparound design
• Helps minimize the risk of the tail light being smashed
• Large, reverse light cutout
• Allows for maximum light output when in reverse
• Brake light stencil cutouts
• Keep those behind you in the know while making a statement
• Easy installation
• Made right here in the USA
• For 07-18 Jeep Wrangler JK

Attention all flat fender owners! Have no fear, we still think it makes sense to devise innovative solutions to the Granddaddy of all Jeeps. This reverse light switch allows you to add reverse lights to your old CJ and have them come on when you put it in reverse.

All you have to do is bolt this plate to your transmission shifter housing, wire the switch into your reverse light circuit and Voila, reverse lights.

Details:

• Pre 1945-71 Willys Jeep models with a t-90/t-84.  Rear of shift rail must be open.
• Sold as Kit

If you are looking to step up your Booty game look no further.  Choose the options that fit your Jeep and your wallet.